|
Ürün ayrıntıları:
Ödeme & teslimat koşulları:
|
| Body: | Aluminum | Core and Plugnut: | Stainless steel |
|---|---|---|---|
| Core Spring: | Stainless steel | Working Pressure: | 0.35-0.85Mpa |
| Sealing & disc: | CR (chloroprene) | Diaphragm: | TPE , NBR(nitrile/buna-n) or Viton |
| Vurgulamak: | Goyen Diaphragm Valves,Dust Collector Pulse Valves |
||
Construction:
| Body | Aluminum |
| Core tube | Stainless steel |
| Core and Plugnut | Stainless steel |
| Core Spring | Stainless steel |
| Sealing & disc | CR (chloroprene) |
| Diaphragm | NBR(nitrile/buna-n) or Viton |
| Shading coil | Copper |
| Connector | DIN43650A |
| Voltage | DC: 24V, AC: 24V,48V,110V,230V |
| Working Temperature | - 20 to + 85 ℃ |
| Protection Class | IP65 |
| Coil Insulation Class | F |
| Working Pressure | 0.35-0.85Mpa |
OPTIONS:
| 1 | Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE 10 |
| 2 | Explosionproof solenoids for hazardous locations according to “ATEX” (CENELEC) and national standards |
| 3 | Explosionproof and watertight solenoids according to “NEMA” standards |
| 4 | Hose connection executions (3" only) |
| 5 | Compliance with “UL” standards |
| 6 | Plug with visual indication and/or peak voltage suppression |
| 7 | Electronic timer |
| 8 | Valves can also be supplied with FPM (fluorelastomer) diaphragms and seals. Use the appropriate suffix letter for identification |
INSTAllATION:
| 1 | The valves can be mounted in any position without affecting operation,Threaded pipe connection is: G = G (ISO 228/1) or compression fittings |
| 2 | Other pipe threads are available on request, Installation/maintenance instructions are included with each valve, Spare parts kit and replacement coils are available |
| 3 | When connecting piping or tubing to the G1/8 connection in the valve bonnet, the remote ASCO pilot valve should be mounted as close as possible to the main pulse valve. Connection tubing lengths of 3 meter or less have little effect on the pulse response. Installations with over 3 meter of tubing must be tested under actual operating conditions. Tubing with Ø 6 mm O.D. is recommended for all installations |
| 4 | For compression fitting types tightness is achieved by the compressed gasket on the blow tube |
FEATURES:
1. The SCXE353.060 3 " pulse diaphragm pulse valves are especially designed for dust collector service applications,
combining high flow, long life and extremely fast opening and closing to provide reliable and economical operation
2. The high quality diaphragms are reinforced and wear resistant to guarantee a long operating life,
even under harsh conditions
3. Built-in silencers guarantee noise free operation and avoid foreign particles entering the valve
4. The integral operators are provided with epoxy moulded F-class coils. Various optional waterproof
and explosionproof solenoids for use in potentially explo- sive atmospheres (gas & dust) according
to Directive ATEX 94/9/EC can be mounted on the same basic valve
DIMENSIONS (mm):
Product Show:
İlgili kişi: Mr. L
Faks: 86-187-1871-1052
